Andre's 1968 Triumph GT6 MK1 - 2008 Photo Gallery - 24 May 2008 Cooling & EDIS Work

Up one level

DSCN3576 * Left is Rimmer, Right is from Spitbits. * Left is Rimmer, Right is from Spitbits. * 2288 x 1712 * (1.32MB)

DSCN3577 * Slight difference. * Slight difference. * 2288 x 1712 * (1.31MB)

DSCN3578 * I cut the studs down too. Grinded the paint off the pulley and thing used some weldable primer. * I cut the studs down too. Grinded the paint off the pulley and thing used some weldable primer. * 2288 x 1712 * (1.33MB)

DSCN3579 * 6 cylinder is 60 degrees BTDC. * 6 cylinder is 60 degrees BTDC. * 2288 x 1712 * (1.35MB)

DSCN3580 * Is this right? The notch is 60 degrees before the sensor. The pulley is at TDC. * Is this right? The notch is 60 degrees before the sensor. The pulley is at TDC. * 2288 x 1712 * (1.35MB)

DSCN3581 * Ok 60 degrees. Better? * Ok 60 degrees. Better? * 2288 x 1712 * (1.42MB)

DSCN3582 * Can you see why I was having issues? * Can you see why I was having issues? * 2288 x 1712 * (1.47MB)

Album last updated on Mar 06, 2009 - 04:44 PM

Powered by and skin

GT6.ca